IR Series
The IR Series is commonly used in areas with high air infiltration, high ceilings and/or spot heating applications. The IR Series is available in several configurations including 24 VAC or 120 VAC control options.
IR Series Available Models
* Recommended mounting heights listed above are provided as a guideline. Actual conditions may dictate variations from the above data.
Always maintain published clearance to combustibles. The stated clearances to combustibles represent a surface temperature of 90°F (50°C) above room
temperature. Building materials with a low heat tolerance (such as plastics, vinyl siding, canvas, tri-ply, etc.) may be subject to degradation at lower temperatures. It is the installer’s responsibility to ensure that adjacent materials are protected from degradation.
When placing an order, specify gas type and voltage.
IR Series Literature
RH Series
Universal-Ray RH Series Infrared Tube heaters offer more than economy. Quality construction and operational features make the Universal-Ray system the best in this class of equipment. The RH Series utilizes direct spark ignition, mirror finished aluminum reflectors and end caps. Choose from natural or propane gas, 50 to 175 MBTU/H, 20- to 60-foot lengths available in a variety of tube packages and configure your system as a straight, “U” or “L” shaped heater.
- Enameled control box (light blue).
- 4″ combustion air intake collar.
- Operational indicator lights for troubleshooting at floor level.
- Potted circuit board for high moisture applications.
- Gas cock and flex connector provided.
- Single pressure switch operation.
- Highly polished aluminum reflectors and end caps.
- Turbulator baffle for maximum heat transfer.
- Totally enclosed components.
RH Series Available Models
* Recommended mounting heights listed above are provided as a guideline. Actual conditions may dictate variations from the above data.
Always maintain published clearance to combustibles. The stated clearances to combustibles represent a surface temperature of 90°F (50°C) above room
temperature. Building materials with a low heat tolerance (such as plastics, vinyl siding, canvas, tri-ply, etc.) may be subject to degradation at lower temperatures. It is the installer’s responsibility to ensure that adjacent materials are protected from degradation.
When placing an order, specify gas type and voltage.
Models are shipped with one 1/2″ gas cock, one 24″ stainless steel flex hose, reflector center support, reflector end caps with clips, turbulator baffle, and applicable clamps and hangers.
RH Series Literature
RHT Series
Universal-Ray RHT Series, two-stage infrared tube heaters offer more than economy. Quality construction features make the Universal-Ray system the best in this class of equipment. Choose from natural gas or propane gas, 65,000 to 175,000 BTU/h inputs, 20 to 60-foot tube lengths available in a variety of tube packages and configure your system as a straight, U or L-shaped heater.
RHT Series Available Models
* Recommended mounting heights listed above are provided as a guideline. Actual conditions may dictate variations from the above data.
Always maintain published clearance to combustibles. The stated clearances to combustibles represent a surface temperature of 90°F (50°C) above room
temperature. Building materials with a low heat tolerance (such as plastics, vinyl siding, canvas, tri-ply, etc.) may be subject to degradation at lower temperatures. It is the installer’s responsibility to ensure that adjacent materials are protected from degradation.
When placing an order, specify gas type and voltage.
Models are shipped with one 1/2″ gas cock, one 24″ stainless steel flex hose, reflector center support, reflector end caps with clips, turbulator baffle, and applicable clamps and hangers.